30 Amp Prosafe Isltr FAIL SAFE

ProMariner ProSafe FAILSAFE 30amp Galvanic Isolator Product Description

FailSafe Technology with Peace of Mind Dependability. The ProSafe FS Series of FailSafe 30 and 60 Ampere Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. Both the ProSafe 30 and 60 Amp models are built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.

Pro Mariner 22034 Attributes

Pro Mariner 22034 Features & Benefits

• Flat Pack High Power Semiconductors: Robust High Power Diodes Allow The FS Series To Meet The New FailSafe Criteria
• Innovative Design: The FS60 Will Cool Itself In The Event It Must Conduct Current Insuring Cooler Operation In This Mode
• Ignition Protected: Meets ISO 8846 And Either Model Can Be Mounted Within An Engine Compartment
• Gold Plated Terminations: Simply Install In The On Board Green Safety Ground Wire
• Use The ProSafe FS30 For 30 Ampere Shore Cord Applications
• Limited 5 Year Warranty

Pro Mariner 22034 Installation Instructions

• 22034_USE_FailSafe.pdf
• 22034_USE.pdf

Pro Mariner 22034 Technical Bulletins

• 22043_SS.pdf

• ProSafe FS 30 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.
  
• ABYC A-28 July '08 Compliant and Fail Safe Certified
  Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
  
• Flat Pack High Power Semiconductors
  Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
  
• Ignition Protected
  Meets ISO 8846 and can be mounted within an engine compartment.
  
• Gold Plated Terminations

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.