19" X 14" Extreme Duty Performance Trim Tab Kit W/O Switch Kit 12V

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V Product Description

Lenco 19" x 14" XD Performance Trim Tab Kit 10-Gauge Electro-Polished Blades / Dual 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Lenco Electric Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. All the robust features of our single actuator XD series with twice the actuator power for larger, faster boats that dont back away from rough conditions. Boat lengths 23' (7 m) to 50' (15.2 m). Blades are constructed of Electro-Polished 10 gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets,3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Lenco 15046101 Attributes

• Tab Size: 19 Inch Length x 14 Inch Width
• Material: Stainless Steel

Lenco 15046101 Features & Benefits

• L" X W": 19" x 14"
• Boat Length: 23' - 45'
• Min. Transom Height: 10.5" (26.7 cm)
• Note: Boat-mounting hardware to be supplied by the customer
• Note: Actuator extension harnesses not in kits, must be purchased separately (4 required)

Lenco 15046101 Installation Instructions

• Trim_Tab_Manual_TCHDAT.pdf

Lenco 15046101 Technical Bulletins

• backplate_dual_ram_TCHDAT.pdf
• size_diagram_hp_dual_ram_TCHDAT.pdf

19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit- 12V- Dual Actuator Kit

Lenco Electric Extreme Duty Polished Blade Trim Tab Kits feature fast response actuators for precise control. They are fully submersible and feature Plug & Play Deutsch connections. Blades are Electro-Polished 10 Gauge - 304 SS with 1" turned up edges, an 85 degree inside taper and 3/8"diameter hinge pin. Extreme Duty actuators with 3/8" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

Kit Contents:

• 2 each of stainless steel trim tab planes
• 4 each of #15056-001XD extreme duty actuators with 6" lead & Deutsch plugs
• Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

The following to be supplied by customer:

• Boat mounting hardware
• Actuator extension harnesses (2 for single actuator application or 4 for dual)
  will be required. Order the lengths of your choice. See the Lenco
  Accessories section.

Specifications:

• Suggested Boat Length: 23' to 45'
• Length of Tab: 19"
• Width of Tab: 14"
• Minimum Transom Height: 10.5"
• Blades: 10 Gauge Stainless Steel
• Finish: Electro-Polished
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Switch Required: 15071-001 
• Actuators: 12-volt