Skip to product information
1 of 6

T-H Marine

Atlas 6" Set Back Hydraulic Jack Plate Std

Atlas 6" Set Back Hydraulic Jack Plate Std

SKU: Part Number: AHJ-6V-DP

Pre-Order

Regular price RM9,136.00
Regular price Sale price RM9,136.00
% Off Sold out
Shipping calculated at checkout.

Description & Specification

T-H Marine ATLAS™ 6" Set Back Hydraulic Jack Plate Polished Product Description

The Atlas revolutionary design meets the demands of today's high performance outboards. The one piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses from the heaviest and most powerful outboards, up to 300 Horse Power on the market today. All of the hydraulics are built into the jack eliminating the necessity of installing pumps and reservoirs inside the transom. The all new hydraulic unit is fast too. Lifting from bottom to top in 8 second.

T-H Marine AHJ6VDP Attributes

  • Setback: 6 Inch
  • Hydraulic Rise: 5-3/4 Inch
  • Total Rise: 8-1/4 Inch To 9-3/4 Inch
  • Horsepower: 300 Horsepower
  • Adjustment: 7 Inch Vertical
  • Finish: Polished
  • Color: Silver
  • Material: Aluminum
  • With Rocker Switch: Yes
  • With Relay Harness: Yes

T-H Marine AHJ6VDP Features & Benefits

  • One Piece Design
  • Featuring The Innovative Rod And Slot Lifting System
  • 300 Maximum Horsepower
  • Will Handle The Stresses From The Heaviest And Most Powerful Outboards
  • Limited Lifetime Warranty


ATLAS™ 6" Set Back Hydraulic Jack Plate Polished

Rated for engines up to 300hp or up to 625 pounds dry weight.

5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE

  • ATLAS™ is truly the best hydraulic jack plate in the world
  • ATLAS™ is factory installed by more boat manufacturers than any other plate
  • ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
  • ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
  • ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China

6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER

  • ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
  • ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
  • ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
  • ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
  • ATLAS™ was the first plate to offer a very simple actuator replacement in the field
  • ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement



Designed to meet the needs of today's high-performance outboard motors. This one-piece design with an innovative rod and groove lifting system will be able to cope with the pressure of the heaviest and most powerful outboard engines on the market today. All hydraulic devices are built into the jack, which saves the trouble of installing pumps and fuel tanks in the beam and hydraulic hoses that cross the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made of self-lubricating materials. From top to bottom within 8 seconds, installation time is only half of similar jacks.


⚠️ IMPORTANT NOTE:
Product dimensions are subject to change without prior notice due to updates in manufacturer safety guidelines and standards. As a result, the size of the product delivered may vary slightly from the specifications provided at the time of order. We recommend reviewing the latest information before purchase to ensure compatibility. This policy is in place to prioritize your safety and the quality of our products.

Product images are for illustration purposes only and may vary based on your monitor’s resolution. Actual colors and details of the product may differ from what is displayed. Please consider this when making your purchase.
View full details